Endress+Hauser chroma-log SL Betriebsanleitung Seite 51

4 Changing consumbables (paper/pens)
Fan the new paper stack from both sides as shown.
Take the first four or five sheets of paper, bend them backwards and place the
paper stack flat into the paper supply compartment. (Attention: do not allow the
paper to sit on the outer edges of the compartment).
Return the guide to its normal position.
Tilt the tear off strip forwards. Take the already prepared four or five sheets of
paper and push them between the tear off strip and the feed axle. Place two or
three folded sheets into the collection compartment. (Attention: Make sure that
the paper does not lie on the moulded edges, the paper perforation does not
tear and the paper grid runs parallel to the wind up axle.
49