Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This device is intended to be operated us-
ing a mains supply network with an service
current capacity on the transfer point (house
connection) of max. 100 A per phase.
The user must ensure that the device is
operated only on a power supply network
that fulfi ls this requirement.
If necessary, the local power supply compa-
ny can be asked for the system impedance.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specifi ed in the decla-
ration of conformity.
Safety information
This section covers the basic safety
regulations when working with the
electric lawnmower.
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protec-
tion.
Risk of injury from parts be-
ing thrown up.
Keep nearby people away
from the mower.
Do not expose the equipment
to the damp. Do not work in
the rain and do not cut wet
grass.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the plug before
adjustment or repair work or
if the power cable is caught
or damaged.
Danger of damaged power
cable.
Keep the power cable away
from the cutting blade!
Caution!
The lawnmower blade contin-
ues to run after switching off.
Scale cutting height
440
Cutting circle
Noise level specifi cation L
96
in dB.
GB
MT
WA
25
Werbung
