Zodiac RE 42 Installations- Und Gebrauchsanweisung Seite 8

❷ General use
2.1 Immersing the cleaner
• Roll out the full length of the cable alongside the pool to avoid the cable becoming tangled during immersion (see
figure ).
• Position yourself halfway along the length of the pool before immersing the cleaner (see figure
the cleaner's movements and reduce tangling in the cable.
• Place the cleaner vertically into the water (see figure
• Move it slightly in all directions so that the air contained in the cleaner escapes (see figure
• Unroll enough cable into the pool to allow the cleaner to move in the whole
figure ).
).
pool. Lay the rest by the pool side (see
). This will optimise
).
not
recommended
Recommended entry point
EN
7