Zodiac RE 42 Installations- Und Gebrauchsanweisung Seite 19

4.3 I Cleaning the impeller
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when maintaining the impeller
• Open the filter access hatch by lifting the lock (see figure
• Remove the filter (see figure
• Insert a screwdriver into the holes and maintain right pressure to loosen flow guide by turning the screwdriver in the
anti-clockwise direction (upon first removal, the flow guide is securely tightened) (see figure
• Once the flow guide has been loosened, unscrew it by hand (see figure
• Remove the flow guide (see figure
• Put on a pair of gloves and pull the impeller, holding it firmly to take it out (see figures
• Remove any debris (leaves, stones, etc.) which may be blocking the impeller.
• Once cleaning is complete, reinsert the impeller and the filter firmly.
18
).
) by lifting it.
.
).
).
).
).
and