Julabo TE400 Bedienungsanleitung Seite 96

Controller Display Panel Functions
11.5 Alarms Display Screen
If the system is not in an alarm condition, then the alarms tab doesn't show any
alarm.
If the system experiences an alarm condition, the alarm button changes on the
home screen to indicate this.
11.5.1 Acknowledging Alarms
Alarms can be acknowledged individually by selecting them and then pressing
the ACKNOWLEDGE button. When there are multiple alarms, they can be
acknowledged together by pressing the SELECT ALL button and then the
ACKNOWLEDGE button.
Red alarms are used to indicate an abnormal system condition and is usually
associated with the shutdown of a component or the whole system. There is an
audible alarm for this condition and requires an action from the customer for the
system to restart.
Amber alarms are warnings to indicate an abnormal system condition, but the
system or components are not shut down. There is no audible alarm for this
condition.
For specific alarm conditions and troubleshooting information, refer to section
Alarms
96