Julabo TE400 Bedienungsanleitung Seite 73

3.2 Safety and Signaling Equipment Included in the Unit
The unit is equipped with the following safety equipment:



3.3 In Case of Accidents
Should you or another person be injured when working with the unit, do the
following:




3.4 Environmental Issues
Environmentally conscious and anticipatory behavior of staff helps avoid
environmentally hazardous events. The following apply for environmentally
conscious behavior:



The minimum coolant level in the system is detected by a 'low fluid level'
alarm condition triggered by an optical level switch. When the coolant level
drops below the LOW" level marking on the front of the chassis, the
controller shuts off the entire unit.
Controller has a freeze protection incorporated into the LCD. The default
temperature selection that can be made is only 10C to 40C, when the
coolant selected by the customer is water (default). Depending on the other
coolant options selected the setpoint temperature can be selected to below
10C value. More details are given under Choosing the Coolant
The coolant supply temperature is monitored by the controller. There are
two temperature delta alarms monitoring this. The low temperature delta
alarm alerts the customer if the coolant supply temperature is not within
certain pre-specified temperature delta below the temperature set point in a
specified amount of time, after starting the unit or changing the set point.
Similarly, the high temperature delta alarm alerts the customer if the
coolant supply temperature is not within certain pre-specified temperature
delta above the temperature set point in a specified amount of time after
starting the unit or changing the set point.
Stay calm
Perform first aid
Always call the company's first aid personnel
If necessary, call the applicable emergency number
Environmentally hazardous substances must be stored in appropriate
containers to avoid releasing them into the soil or drainage systems.
Environmentally hazardous substances must be used or disposed of
according to regional regulations.
When dealing with working fluids, always be aware of the safety data sheet
of the corresponding manufacturer.
Safety Precautions
73