Julabo TE400 Bedienungsanleitung Seite 82

Installation Requirements
Procedure
1. Pack the unit according to the transport conditions that can be expected.
 JULABO advises to use original packaging, if available, or an equivalent
2. Mark the packaging with the appropriate symbols. Refer to Symbols on the
 The unit can now be transported.
Pos: 12 /Technische Doku ment ation/F lash CORIO/PUR A/Vorb ereitungen @ 1\mod_14576 025 66371_6.docx @ 9388 @ 1 22 @ 1
7 Installation Requirements
Minimum Clearance from obstructions is required to ensure that air intake and
air discharge is not blocked as this could affect cooling capacity:




The location must be level.
When choosing the installation location, the following must be kept in mind:




Pos: 12 /Technische Doku ment ation/F lash CORIO/PUR A/Vorb ereitungen @ 1\mod_14576 025 66371_6.docx @ 9388 @ 1 22 @ 1
82
packaging..
Packaging.
Front side: 40 cm
Left side : 25 cm
Right side: 25 cm
Rear side: 40 cm
The flow of the cooling air must not be restricted.
Coolant inlet and coolant outlet connections must be easily accessible.
Power Cord must be easily accessible.
All hoses must be installed without sharp bends