Julabo TE400 Bedienungsanleitung Seite 113

NOTE
Damage to the fins of the heat exchanger due to improper
handling of the unit
Damaged fins of the heat exchanger lead to a reduced cooling capacity.

Take care not to damage the fins of the heat exchanger when
cleaning the heat exchanger.

Air pressure used to clean the fins must be controlled to prevent
damage to the fins.

If the fins of the heat exchanger are not in a suitable condition, the
unit must only be used again once the damage has been rectified.
Requirements
 Unit prepared for maintenance. Refer to Preparing the Unit for Maintenance.
Required Tools and Materials
 Vacuum cleaner
 Compressed air pistol/pressurized air spray
 Hand brush
 Brush
Procedure
1. Clean the heat exchanger and grill with a vacuum cleaner, or compressed
air.
2. Care must be taken not to damage the fins.
System Maintenance and Service
113