Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
CY
Dispose of the batteries according to local
standards. Defective or used batteries must
be recycled in accordance with Directive
2006/66/EC. Hand in the batteries at a
used battery collection point where they
are recycled in an environmentally friend-
ly manner. For more information, please
Replacement parts/Accessories
Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 24).
Position
Position
instruction exploded
manual
drawing
10
17
11
16
12
15
Trouble shooting
Problem
Device does not
start
Inferior cutting per-
formance
Saw runs with diffi -
culty, chain comes off
Chain becomes hot,
smoke development
during sawing, dis-
coloration of the rail
22
Description
blade bar
Saw chain
Blade encasing
Possible cause
The battery (13) is empty or not
inserted
Defective On/Off switch (4)
Defective motor
Incorrectly mounted saw chain (11) Mount saw chain correctly
Saw chain (11) blunt
Chain tension insuffi cient
Chain tension insuffi cient
Too little chain oil
contact your local waste management pro-
vider or our service centre.
Dispose of batteries in a discharged state.
We recommend covering the contacts with
an adhesive strip to protect against short
circuits. Do not open the battery.
Fault correction
Check the charge level, and have
repairs carried out by a quali-
fi ed electrician, if necessary.
Repair by customer service
Sharpen cutting teeth or place
on new chain
Check chain tension
Check chain tension
Chain lubrication
Order-No.
91110208
91110207
91110206
Werbung
