Setting Speed Menu" Page; Alarms" Page; Pre-Alarm: "Filters Checking - Vortice VORT INVISIBLE MINI Bedienungsanleitung

ENGLISH

12.3.6 "Setting speed Menu" Page

From "Installer menu" page, you can select "Speed", in order to join to "Setting speed". Pressing the [] key will
display:
VI1
VO1
Å
VI2
VO2
VHI
VHO
Motor speed can be adjusted depending on the system flow rates, selecting:
VI = Fresh air intake from outside
VI1 = min speed 1
VI2 = max speed 2
VO= Stale air outlet to outside
VO1 = min speed 1
VO2 = min speed 2
VHI = Holiday mode speed for the delivery of clean air into the house
VHO = Holiday mode speed for the delivery of stale air to the outside

12.3.7 "Alarms" page

Access the "ALARM" page only if the machine detects one of the problems detailed below:
• Pre-alarm: Filters checking
• Alarm: Filters replacing
• Alarm: No Frost - Wait one hour
• Alarm: Ext probe damaged
• Alarm: Int probe damaged
• Alarm: Exh probe damaged
• Alarm: Pipe
Alarm with machine lock: On the "HOME" page, are alternated shown the words "Alarm!" And "Block!".
Alarm without blocking the machine: on the "HOME" page, the message "Alarm!" Appears.
In the presence of alarms: select the "ALARM" line on the "MAIN MENU" page and press the [] key .
A new descriptive page shows the specific alarm text and troubleshooting instructions.
a
After 2 minutes with no keys being pressed, the display returns to the "Home" page without
saving any changes.

12.3.8 Pre-alarm: "Filters checking"

After the preset time has elapsed, "Alarm" appears in "HOME" and the note "Check clean filter" in the "Alarms"
54
SPEED
without blocking the machine;
without blocking the machine;
occurs with the machine lock;
without blocking the machine (No Frost, By-pass: not enabled);
without blocking the machine ("By-pass" not enabled);
without blocking the machine (No Frost not enabled);
occurs with the machine lock;
MAIN MENU
USE MENU
ALARM
SETUP
INFO
[ ▲ ]
VO1
040
[ ▲ ]
9 9
[ ]
[ ▲ ]