Basic Safety Notes - Oventrop R-Tronic Kurzanleitung

Installation

Basic safety notes

DANGER
Danger to life due to electric shock
When touching live parts, there is a danger to life due to electric shock.

Work on electrical installations must only be carried out by a qualified
electrician.

The following 5 safety regulations must be observed during wiring:
- Switch off current supply
- Protect against accidental restart
- Check that no voltage is present
- Earth and short-circuit
- Cover adjacent live parts.

Switch off the current supply immediately if the insulation is damaged and
have it repaired.

Never bridge or inactivate fuses.
Observe correct amperage when replacing fuses.

Keep live parts away from moisture.
CAUTION
Risk of fire due to overcharging
If the room controller "R-Tronic" is equipped with batteries and is connected to the
230 V network via the flush-mounted power pack or the table stand, there is a risk
of overcharging of the batteries.

The operating unit "R-Tronic" must never be equipped with batteries
when using the flush-mounted power pack or the table stand.

If the "R-Tronic" is equipped with batteries, they have to be removed before
using the flush-mounted power pack or the table stand.
2 (4)
Brief instruction