Agilent Technologies Turbo-V 2000HT Betriebsanleitung Seite 93

•
Enter the value by pressing the PUMP CURRENT
push-button.
•
Press the CYCLE NUMBER push-button to select the
second number.
S P E E D T H R E S H O L D
S E L E C T I O N : X X K R P M
•
Enter the value by pressing the PUMP CURRENT
push-button, and the display shows:
R U N - U P
S E L : X X h
where: RUN-UP TIME = is the interval time from start to
speed threshold value in hours, minutes, seconds. Select
from 00 to 99 hours, and from 00 to 59 minutes or
seconds.
Select the run-up time according to the chamber volume
and/or operating cycle feature (see the preceding cycle
diagram) by pressing the CYCLE NUMBER push-button
to select the desired number.
87
TECHNICAL INFORMATION
T I M E
X X m X X s
87-900-913-01 (N)