Werbung
CONTROLS
AND
THEIR
FUNCTIONS
@ Microphone jacks (MIC)
For connection
of microphones
of 200~
6000. (For connection of other than micro-
phones, see pages 13 and 15)
Input impedance:
5.6Ka (2 circuits)
Standard
input level:
—74
dB (0.2mvV)
@ Headphone jack (H. PHONE)
|
For connection of stereo headphones
(8Q).
Ideal for private listening during playback,
and
for
monitoring
the
recorded
sound
during recording. The recording and play-
back volume
level are set to the desired
level for stereo headphone use.
38) PLAY/FF
control switch
To move
the tape rapidly forward
during
playback,
move
the control
switch to the
FF position. The FF speed is approximately
twice that of ordinary playback. When
the
tape reaches the desired
position, set the
control
switch
to the PLAY
position
and
playback will begin.
Recorded
sounds
cannot
be heard during
fast forward operation.
NOTE:
Fast
forwarding
cannot
be
performed
during recording.
=f 4 OB: (O20)
IHRE
FUNKTIONEN
@ Mikrophonbuchsen
(MIC)
Angeschlossene
Mikrophone
sollten
eine
Impedanz von 200-~6000
haben.
(Vergl. Sie Seite 13 und 15 wegen anderer
Anschlusse).
Eingangsimpedanz:
5,6ka
(zwei Kreise)
Standardaufnahmeniveau:
—74dB(0,2mvV)
nicht verwendet werden.
Werbung
