Decommissioning The Appliance - Dalbach Wht90-01 Gebrauchs- Und Montageanweisung

EN
1. To replace the lamp, first remove the filter unit.
2. Unscrew the defective lamp in anti-clockwise direction and remove it.
3. Do not touch the new lamp directly with your fingers; use a clean cloth to
screw in the lamp.
4. Carefully insert the new lamp into the lamp bracket and screw tight in
clockwise direction.
5. Carefully fit the filter unit into the extractor hood again.
6. Connect the appliance to the power supply again.
➢ The LED modules can be ordered from After Sales Service

13.5 Decommissioning the appliance

To switch off the appliance, remove the mains plug and switch off or unscrew the
fuse.
8 After Sales Service Tel. +49 2944 9716-760
Seite | 56
8 .