Replacing The Lamp; Risk Of Burns; Risk Of Injury - Dalbach Wht90-01 Gebrauchs- Und Montageanweisung

EN

13.4 Replacing the lamp

Replace the lamps in the appliance with the same type of lamp.
ELECTRIC SHOCK HAZARD!
Before replacing the lamp, switch off the appliance, remove the mains plug and
switch off or unscrew the fuse.

RISK OF BURNS

Do not touch the lamp until the appliance has been switched off and the lamp
has cooled down completely.
Do not cover the lamp with heat insulation or other material.

RISK OF INJURY!

The light from LEDs is very bright and can damage the eyes. Do not look directly
into the switched-on LEDs for longer than 60 seconds.
Lamp data: 220-240 V, max. 1.5 W
Fitting: E 14
(similar to figure)
Page | 55