Replacing The Activated Charcoal Filter - Dalbach Wht90-01 Gebrauchs- Und Montageanweisung

EN

13.3 Replacing the activated charcoal filter

Depending on the usage of the extractor hood in recirculating air mode, activated
charcoal filters must be replaced every six months, but at least every year. This
filter can neither be washed nor reused.
In order to guarantee proper absorption of the odours, the volume of activated
charcoal must match the extraction capacity of the hood. The high quality of the
activated charcoal guarantees efficient absorption of the kitchen odours with
normal operation. Therefore use only original filters and replace at regular
intervals.
1. Push down the lock of the metal filter cassette (I).
2. Carefully remove the metal filter cassette (II).
3. Unscrew the activated charcoal filter. Remove it and dispose of with
household waste.
4. Fit new activated charcoal filters on both sides of the motor.
5. Press the filters onto the plastic lugs and turn them clockwise until they
click into place (III).
6. Reinsert the metal filter correctly (IV).
7. Connect the appliance to the power supply again.
Seite | 54