Dalbach WHT90-01 Gebrauchs- Und Montageanweisung Seite 39

RISK OF INJURY!
• Two people are required to mount the extractor hood.
• Before drilling holes in walls or ceilings, check that there are no concealed
power cables or pipes in that area.
• Use only installation materials that are suitable for the condition of the
walls and ceilings.
Before installing the extractor hood, fit the exhaust air fitting on the housing.
Use the screws supplied to fix the exhaust air fitting to the housing. Longer
screws could damage the internal wiring. Failure to follow these instructions does
not entitle you to any warranty claim.
Set up the appliance
• so that the mains plug is accessible at all times Do not pinch or damage
the mains power cable.
• Do not connect to mains power supply via multiple sockets or extension
leads.
• and do not operate outdoors.
• in accordance with the prescribed minimum clearances.
EN
Page | 39