Installation For Recirculating Air Mode - Dalbach Wht90-01 Gebrauchs- Und Montageanweisung

EN
8. Snap the flue panel into the bracket.
Fig. 6
11.5 Installation for
recirculating air mode
The installation of activated charcoal filters is necessary for recirculating air
mode. The air extraction performance is reduced when the activated charcoal
filter is installed.
The intaken air is first passed through the
grease filter and then through an
additional activated charcoal filter and
returned to the kitchen area as clean air.
The air outlet openings on the flue must
be open so that the cleaned air can flow
freely into the room.
The inner flue shaft of this extractor hood
must protrude far enough beyond the
outer flue shaft that the cleaned air can flow out unhindered through the air
outlet openings.
In recirculating air mode, the non-return flap must be removed, otherwise the
extractor hood will not work.
Page | 47