Preparing The Appliance For Installation; Electric Shock Hazard - Dalbach Wht90-01 Gebrauchs- Und Montageanweisung

EN

11.1 Preparing the appliance for installation

The extractor hood can be operated in both air extraction mode and in
recirculating air mode.

ELECTRIC SHOCK HAZARD!

The installation work and electrical may only be carried out by a qualified
electrician in accordance with all the relevant regulations and standards
applicable in your country, including the fire protection measures.
• Incorrect connection can result in destruction of the power electronics.
• The connection data on the type plate must correspond to those of the
mains power supply grid.
• Connect the appliance only to a properly earthed plug socket with earthing
contact.
➢ The connection data can be found on the type plate and in the
"Technical data" chapter of this instruction manual.
➢ Open the extractor hood and remove the filter cassette.
➢ The type plate can be found inside the appliance.
Seite | 38