Benelli TRK502 2019 Bedienungsanleitung Seite 124

Catalytic converter
This model is equipped with a catalytic con-
verter in the exhaust system.
WARNING
The exhaust system is hot after operation.
To prevent a fire hazard or burns:
• Do not park the vehicle near possible
fire hazards such as grass or other ma-
terials that easily burn.
• Park the vehicle in a place where pe-
destrians or children are not likely to
touch the hot exhaust system.
• Make sure that the exhaust system
has cooled down before doing any
maintenance work.
• Do not allow the engine to idle more
than a few minutes. Long idling can
cause a build-up of heat.
NOTICE
Use only unleaded gasoline. The use of le-
aded gasoline will cause unrepairable da-
mage to the catalytic converter.
Seats
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock, and then
turn it clockwise.
1
1
1. Seat lock
2. Lift the front of the passenger seat and pull
it forward.
To install the passenger seat
1. Insert the projections on the rear of the pas-
senger seat into the seat holders as shown,
and then push the front of the seat down to
lock it in place.
3 - 13
Instrument and control functions
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2 1
2. Unscrew the 2 screws.
3. Remove the rider seat.
To install the rider seat
1. Proceed in reverse order.
EN
3