Hauff-Technik PolySafe MS78-Serie Montageanweisung Seite 25

PolySafe sealing elements and sleeve caps
10 Description and installation of sleeve caps for smooth and corrugated
pipes DA75-90
10�1 *MS78 U-1/24-52 -
Universal-sleeve caps for electricity/water
Areas of application:
1x ø 24 - 52 mm
Legend for Fig.: 1
1 Sleeve cap
2 Ring clip
3 Segment ring
4 Blind plug
For the application range 24-28 mm, the blind plug is
1
removed from the front of the sleeve caps (see fig.: 2).
For all other application ranges, the segment sections of
the universal sleeve caps are penetrated and removed using
a Phillips screwdriver (see table 1).
10�2 MS78 EW 1/24-40 + 3/7-12 -
Sleeve caps for electricity/water
Areas of application:
1x ø 24 - 40 mm
3x ø 7 - 12 mm
Legend for Fig.: 3
1 Sleeve cap
2 Ring clip
3 Segment ring
4 Blind plug
In the case of the sleeve caps for electricity/water and
2
communication (diameter 7 to 40 mm), the relevant
blind plug and segment rings are removed as required
(see table 1) (see fig.: 4).
Art. Nr.: 5090033070 Rev.: 00/2018-03-01
3
4
3
4
EN
1
2
Fig.: 1
Fig.: 2
1
2
Fig.: 3
Fig.: 4
25