Vitek VT-1202 Red Bedienungsanleitung Seite 5

ENGLISH
STEAM IRON VT-1202
Description
1. Water spray nozzle
2. Water tank lid
3. Additional steam release button
4. Steam supply regulator
5. Spray button
6. Heating element on/off indication
7. Power cord protection
8. Base
9. Temperature regulator
10. Water tank
11. Self clean button
12. Maximal water level indicator
13. Iron soleplate
14. Cartridge for water softening
15. Measuring cup
SAFETY MEASURES
Before using the iron, please read the instruc-
tions carefully and pay attention to the illustra-
tions.
• Before switching on the iron, make sure that
your home electricity supply corresponds to
the voltage of current specified on the iron.
• Power cord is equipped with a euro plug; in-
sert it into the socket, with secure grounding.
• In order to avoid risk of fire do not use adapt-
ers while connecting the appliance to the
outlet.
• In order to avoid overloading of the power
network do not switch on several appliances
with high power consumption simultaneously.
• Do not use the iron if the plug or the power
cord is damaged or if there are other dam-
ages in the iron.
• Use the iron only for the intended purposes
as it is described in the manual.
• Place the iron on a flat stable surface or use
the iron only on the ironing board.
• Never leave the working iron unattended.
• Always unplug the iron while filling the water
tank with water.
• While using the iron, make sure that the water
tank lid is firmly closed.
• Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemical agents etc.
1202.indd 4 1202.indd 4
• Avoid contact with hot surfaces or outgoing
steam of the iron in order to avoid getting
burns.
• Make sure that the power cord is not hanging
over the edge of the ironing board and make
sure that it does not touch heated surfaces.
• Before switching on/off the iron set the tem-
perature regulator in position
steam supply regulator in position «
stant steam supply is off).
• Always unplug the iron if you do not use it.
• To unplug the iron always take it by the plug,
do not pull by the power cord.
• In order to avoid electric shock do not im-
merse the iron into water or other liquids.
• Before taking the iron away for storage, pour
out the remaining water and let the iron cool
down.
• Pour out water only after you have unplugged
the iron.
• Do not use the iron that was fallen in case of
visible damages or leakage.
• In order to avoid electric shock do not repair
the iron yourself. If there are some damages
in the iron apply to the authorized service
center.
• Do not allow children to use the iron as a toy.
• Storage the iron in place unavailable for chil-
dren and disabled people. Do not allow them
using the iron without supervision.
• The described iron is not designed for chil-
dren or disabled people. In exceptional cases
the person who is responsible for safety of
children and disabled people shall carefully
and properly give instruction about safety use
of the iron and those risks that may appear in
case of misuse.
• Storage the iron in vertical position in dry cool
place unavailable for children.
• The iron shall be used only at home.
Automatic switching off
There are 2 regimes of iron automatic switching
off.
1. If the iron is fixed in horizontal position within
30 seconds, heating element is off and indi-
cator (6) is blinking. When you start ironing
the iron is switched on automatically.
2. If the iron is fixed in vertical position within 8
minutes, heating element is off and indicator
4
«MIN», and the
» (con-
20.09.2011 12:34:57 20.09.2011 12:34:57