Renishaw RMP60 Schnellstartanleitung Seite 18

Note: Unless the RMP60 is in
'Multiple probe' mode, it will be
necessary to partner it with the RMI
before use.
Note: In configuration mode,
configure the settings as required
and then enter the 'Acquisition mode'
menu. Select 'Acquisition mode off'.
Note: Once in 'Acquisition mode
off' ensure the next two steps are
completed within 20 seconds.
1-12
RMP60 - RMI partnership
Acquisition
mode
off
Switch on the RMI
3
< 4 s
continued on next page
Acquisition mode
Acquisition
mode
on
SIGNAL LED
RMI in acquisition mode
Deflect the stylus to select
'Acquisition mode on'.
Ensure this is done within
10 seconds of the RMI
signal LED flashing green.
3