Renishaw RMP60 Schnellstartanleitung Seite 15

Placing the probe in configuration mode
1 LED check
2
> 5 s
3
3
Key to the symbols
Deflect the stylus and hold deflected until
LED short flash.
after the battery status has been displayed
LED long flash.
at the end of the review sequence.
Deflect the stylus < 4
seconds to move to the next
menu option.
Battery status
Deflect the stylus > 4
seconds to move to the next
Battery good Battery low
menu.
or
To exit, leave the stylus
untouched for >20 seconds.
To change the switch on method
go to the next page
1-9