TESTBOY Profi III LCD Bedienungsanleitung Seite 25

The following safety precautions are applicable:
|
Immediately before using, carry out a function
check of the voltage tester (VDE regulation
0105, Part 1- Operation of elec. installations).
Make sure that the connecting lines and ap-
pliance are fully serviceable. Check the appli-
ance on a known source of voltage, e.g.
230 V socket.
|
Hereby, if the display fails to indicate one or
more functions, do not use the appliance and
it must be checked by a specialist.
|
Only hold the appliance by the handles, avoid
touching the probes!
|
Only carry out for isolation from the power
supply on both poles!
|
The appliance must not be operated in a
moist environment!
Do not use with the battery compartment
open! Whilst replacing the battery, the con-
necting lines must be removed from the
measurement circuit
|
Correct indication is ensured in the tempera-
ture range of −10 °C - +55 °C.
|
Always keep the appliance dry and clean. The
housing can be cleaned using a moist cloth.
|
The additional warning symbol and acoustic
indications for voltages > 35 V are only for
warning of hazardous voltages, not for meas-
urement.
|
Before the test, check the audibility of the
warning sound at the ambient volume.
|
Immediately replace the batteries when the
battery icon is displayed.
®
Testboy Profi LCD Plus
Operation
25