Operation; Safety Notes - TESTBOY Profi III LCD Bedienungsanleitung

Operation

Operation
Thank you very much for deciding on the Testboy
voltage tester with LCD display. DC voltages of 6V to 1400V and AC voltag-
es of 6 V to 1000 V, polarity, rotating field and continuity tests of up to 50 
can be carried out, as well as FI/RCD tests and resistance measurements up
to 1999 . Due to its rotary distance piece, it is possible to operate with one
hand for voltage measurement.
Because of the high protection class (IP65), the Testboy
also be used under rough conditions.

Safety notes

You have decided on an appliance that offers you a high degree of safety.
It conforms to the standards DIN VDE 0682-401, IEC/EN 61243-3. In order
to ensure safe and correct application, before using initially it is necessary to
fully read these operating instructions.
24
®
Profi III LCD, a two-pole
®
Profi III LCD can
®
Testboy Profi LCD Plus