Switching The Led On And Off; Constant Lighting In One Color; Selecting A Control Program; Cleaning And Maintenance - EuroLite AKKU LED IP FL-20 COB RGB Spot Bedienungsanleitung

Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take old and used batteries to a collection center near you.

Switching the LED on and off

The LED can be switched on with the button ON and switched off with the button OFF. After switching on,
the LEDs light up according to the last control program selected.

Constant lighting in one color

For constant lighting of the LED in one color, press the corresponding color button. Use the buttons
to adjust the brightness. 7 levels are available.

Selecting a control program

Control programs are selected with the corresponding buttons. Use the buttons
Button Program
Flash Color switching and color fading
Strobe White in-and-out-fade
Fade Color fading: red → yellow → green → turquoise→ blue → magenta → white
Smooth Color switching: red → green → blue

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Please dispose of old and used batteries properly.
Brightness /
OFF
Speed
R G
Color buttons
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
LEDs off
LEDs on
ON
B W
Color switching and color fading
FLASH
White fade in and out
STROBE
Color fading
FADE
Color switching
SMOOTH
11/12
and
and to adjust the speed.
00082006.DOC, Version 2.1