Herunterladen Diese Seite drucken

Prima Installazione; Regolazione In Base Alla Corporatura Del Bambino; Regolazione Dell'appoggiatesta - CYBEX SOLUTION X2-FIX Kurzanleitung

Vorschau ausblenden Andere Handbücher für SOLUTION X2-FIX:

Werbung

FIRST INSTALLATION
The child seat consists of a booster seat (d) and a backrest (a) with height
adjustable shoulder and headrest. Only the combination of both parts
provides best protection and comfort to your child.
Warning! The parts of the CYBEX Solution X2-fix must not be used
alone or in combination with boosters, backrests or headrests from
other manufacturers or of a different product series. In such cases, the
certification expires immediately.
Connect the backrest (a) to the booster (d) by hooking the guide lug (b)
on the axis (c) of the booster (d).
Note! Please keep the instruction manual close by for future reference
(e.g. by storing it under the elastic cover at the rear side of the backrest.)
Warning! Please make sure that the plastic parts of the child seat never
get jammed (e.g. in the car door or by adjusting the back seat).
Insert the Linear Side-impact Protection (L.S.P. System) pads on both sides
into the mounting holes (z), then push down until they click into place.
ADJUSTMENT REGARDING THE CHILD'S HEIGHT
A headrest can only provide the best protection and comfort for your
child if optimally adjusted. Only then it can guarantee the optimal
position of the diagonal belt (f). you can adjust the height of the solution
X2-fix headrest (e) in 11 positions. The shoulder rest is attached to the
headrest and does not have to be adjusted separately. You can check
the optimal adjustment of the headrest by trying to fit exactly two fingers
between the headrest and the shoulders of the child.
EINSTELLUNG DER KOPFSTÜTZE
• Place your child in the child seat.
• pull the adjustment handle (h) in order to unlock the shoulder and headrest.
• Bring the shoulder and headrest (e) in the desired position.
• As soon as you let go of the adjustment handle (h), the shoulder and
headrest (e) locks automatically.

PRIMA INSTALLAZIONE

il seggiolino di sicurezza per auto è composto da una seduta (d) e di uno
schienale (a) con appoggiatesta e protezioni per le spalle ad altezza
regolabile integrati. solo l'insieme di entrambe le componenti fornirà al
vostro bambino la corretta protezione e comfort.
Attenzione! Le parti del seggiolino CYBEX Solution X2-fix non devono
assolutamente essere usate separatamente o in combinazione con
prodotti di altro modello o produttore. In tal caso la licenza sarà
automaticamente annullata.
lo schienale (a) è agganciato nell'asse (c) della seduta (d) con il binario
di ancoraggio (b).
Nota! raccomandiamo di conservare il manuale in un posto sicuro.
dovrebbe essere sempre a portata di mano per riferimenti futuri.
consigliamo di riporlo sotto la copertura elastica, sul retro dello schienale.
Attenzione! Fare sempre molta attenzione a non danneggiare il sedile
durante l'uso quotidiano, inserendo le cinture o nel chiudere le porte del
veicolo.
inserire i cuscinetti del sistema lsp (protezione lineare nell'impatto laterale) negli
appositi alloggiamenti (z) da ambo i lati e spingere verso il basso fino a sentire il
click di collegamento avvenuto.

REGOLAZIONE IN BASE ALLA CORPORATURA DEL BAMBINO

soltanto una protezione per le spalle ed un appoggiatesta (e) regolati
correttamente in base all'altezza possono fornire l'adeguata protezione
e comfort al vostro bambino e contemporaneamente garantire la
posizione
ottimale della cintura diagonale (f). l'altezza (e) può essere regolata in 11
posizioni. Le protezioni per le spalle sono fissate all'appoggiatesta e non
richiedono una regolazione distinta. l'altezza dev'essere regolata in
modo da poter inserire 2 dita tra la base dell'appoggiatesta e la spalla el
bambino.

REGOLAZIONE DELL'APPOGGIATESTA

• sistemare il bambino nel seggiolino
• sollevare verso l'alto la maniglia di regolazione (h) per sbloccare il
meccanismo.
• portare protezioni per le spalle e appoggiatesta (e) nella posizione
desiderata.
• lasciando andare la maniglia di regolazione (h) le protezioni per le spalle e
l'appoggiatesta (e) si fissano automaticamente in posizione.
8

Werbung

Kapitel

loading