Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programme 1)2)
AUTO
Machine Care
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
7. BASIC SETTINGS
You can configure the appliance by changing
basic settings according to your needs.
Num‐
Settings
ber
1
Water hardness
2
Rinse aid level
3
End sound
4
Auto door open
5
Key tones
6
Latest pro‐
gramme selec‐
tion
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode. Instructions on how to configure the
appliance are provided further in this chapter.
Water (l)
12.2
10.5
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Values
Description 1)
1L - 10L
Adjust the level of the water softener according to
the water hardness in your area.
Factory setting: 5L.
0A - 6A
Adjust the level of the rinse aid according to the nec‐
essary dosage.
Factory setting: 4A.
1b (on)
Activate or deactivate the acoustic signal for the end
0b (off)
of a programme.
Factory setting: 0b.
1o (on)
Activate or deactivate the AirDry.
0o (off)
Factory setting: 1o.
1F (on)
Activate or deactivate the sound of the buttons when
0F (off)
pressed.
Factory setting: 1F.
1H (on)
Enable or disable the automatic selection of the
0H (off)
most recently used programme and options.
Factory setting: 0H.
When the appliance is in setting mode, the
display shows a digit and a letter. For each
Energy (kWh)
1.140
0.590
Duration (min)
170
60
ENGLISH
11
Werbung
