Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. The water pan
bottom of the cabinet) may not be
properly levelled, or the draining
spout (located underneath the top of
the compressor depot) may not be
properly positioned to direct water
into this pan, or the water spout is
blocked.
1. The illuminant may be damaged.
2. The control system (depending on
model) has disabled the lights due to
the door being kept open too long.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
T
HE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
The sides of the appliance may get warm while the appliance is running.
When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
(located at the rear
11
T
HE LIGHT IS NOT WORKING
AND DO NOT INDICATE A MALFUNCTION
D
C
ONDENSED WATER IN
1. You may need to pull the refrigerator
away from the wall to check the pan
and spout.
1. s. chapter R
ILLUMINANT
2. Close and reopen the door to
reactivate the lights.
:
ISTINCT NOISE
/
ON THE APPLIANCE
75
.
EPLACING
OF THE
.
:
Werbung
