Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. The water is collected in a container underneath the compressor. The water
evaporates in this container
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.
The freezing compartment should be defrosted regularly to ensure proper
operation.
1. Remove the contents from the freezing-compartment and put them into a cooling
box.
2. Place a container in front of the appliance to catch the water.
3. Switch off the appliance by turning the thermostat to position 0/AUS/OFF and
disconnect it from the mains.
4. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning leave the door open for some time to ventilate the appliance.
5.2 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a
qualified professional (not covered by the guarantee).
NOTICE! This product contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for a long duration of time during this
process, it must be allowed to remain upright for 6 hours before plugging it in to
avoid damage to the internal components.
F
REEZER
1. Remove the hinge cover and upper hinge from the top right
side of the cabinet. Remove the screw hole cover from the
top left side of the cabinet.
:
71
Werbung
