Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11. Remove the hole covers from the left upper side of the appliance and reinsert them on the right side
(depending on model).
12. Attach the upper door to the middle hinge carefully and hold the door in position.
13. Align the upper hinge to the prepared holes on the left side properly and screw it tightly. Ensure that
the upper door is fixed safely and properly by the hinges.
It may be necessary to turn the upper hinge through 180
(depending on model).
14. If the appliance is equipped with an upper hinge cover (depending on model), reinstall it.
NOTICE! Adjust the door properly. The seal must close properly.
4. Operation
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
4.1 Description of the appliance
The figure above serves as an example only. Modifications are possible
to align it to the prepared holes properly
0
55
Werbung
