Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. The appliance needs some time to balance temperatures when you have changed
the settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
temperature, the amount of food and the frequency of door-openings. When you
set the temperature of the fridge these aspects should be taken into account.
7. If the accessories inside the appliance are not fitted in their correct position,
replace them according to the image in chapter 4.
8. The appliance must be connected to the mains properly.
9. Do not overfill the appliance.
10. Operate the appliance according to the instructions described in the following
chapters.
4.3 Setting of the temperature
4.3.1 Setting of the temperature of the fridge
The settings of the temperature of the fridge can be adjusted manually by pressing
the SET-button.
When you set a temperature, you set an average temperature for the whole
refrigerator. Temperatures inside each area may vary from the set temperature,
depending on how much food you store and where you place them. Ambient
temperature may also affect the actual temperature inside the appliance. When
you set the temperature of the fridge these aspects should be taken into account.
S
ETTING OF THE TEMPERATURE OF THE FRIDGE
The temperature of the fridge can be adjusted by using the relevant temperature
controller.
The temperature controller is at the illumination unit in the cooling compartment.
(s. figures below / s. also fig., chapter 4.1 D
F
IVE DIFFERENT REFRIGERATION TEMPERATURES OR COOLING LEVELS CAN
Cooling level
Cooling level
ESCRIPTION OF THE APPLIANCE
:
BE SET
1
5
57
:
).
The warmest
The coldest
Werbung
