Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
The dust and debris
Dust and debris might not rotate depending on the type of dust and
of the dust case does
debris and how it accumulates, which is normal.
not rotate
Dust and debris spills out of
Has the dust and debris in the dust
case exceeded the max line of the
the vacuum cleaner when
dust case?
the dust case is removed.
Has the dust and debris in the dust
case exceeded the max line of the
Dust and debris spills
dust case?
out when attachments
If operation is stopped while the vacuum cleaner is in operation facing
are removed.
upwards, dust and debris might remain in the vacuum cleaner air duct.
Stop operation while the vacuum cleaner is facing downwards.
Is the remaining battery level low?
[Battery indicator blinks (about once
times per second)]
Are the power head or mini power
brush securely attached?
The rotary brush of the
power head or mini
Did you lift the power head off of the
power brush stops or
surface (floor or fabric) to be
rotates poorly.
cleaned?
Is dust and debris stuck to the rotary
brush, safety switch, etc.?
The rotary brush of the
The rotary brush might stop
power head stops, or the
automatically to prevent the power
(LED lights turn off.) The
head motor from overheating.
filter indicator blinks.
The rotary brush
The rotary brush might stop automatically to prevent the motor from
overheating.
of the mini power
The safeguard is released after 5 to 60 minutes automatically.
head stops.
Tick sound when moving
This is the sound that occurs due to the structure of the power head. This
is normal.
the power head
LED lights are dim
Is the remaining battery level low?
There is a clattering
sound coming from the
This sound is produced because of the way the safety switch is designed.
power head or mini
The sound does not indicate a problem with the product.
power brush
Is the AC adapter firmly plugged into
the outlet?
Is the connector of the AC adapter firmly
inserted into the vacuum cleaner?
The battery Indicator
Is the battery fully charged?
does not turn on
(remains off) even after
Are the terminals on the AC
the vacuum cleaner is
adapter or vacuum cleaner dirty?
charged.
Did you not use the vacuum cleaner and leave it unattended for a long
period of time without charging it? When leaving it unattended, the battery
might have to be replaced because its performance and life might be
deteriorated. Please consult with the Hitachi authorized service agent.
Things to check
Instructions
Dispose the dust and debris before
it exceeds the max line of the dust
case.
Dispose the dust and debris before
it exceeds the max line of the dust
case.
Charge the battery.
Securely attach it.
The power head are designed to stop
rotating when they are not in contact
with a surface to be cleaned. Make
sure the power head is in contact
with the surface to be cleaned.
Remove the dust and debris.
Empty the dust case and perform
maintenance (wash with water) on
the filters. Remove the object that is
blocking the inlet.
Charge the battery.
Firmly insert the plug.
Firmly insert the connector.
When fully charged, the battery
Indicator turns off.
Unplug the plug and remove the
battery, and remove the dust and debris
on the terminals with a dry cloth.
Page
P.EN-26 to
EN-28
P.EN-26 to
EN-28
P.EN-18
P.EN-13
P.EN-21
EN-23
P.EN-35 to
EN-36
P.EN-26 to
EN-30
EN-33-EN-34
P.EN-39
P.EN-18
P.EN-18
EN-41
Werbung
