Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Rotary brush maintenance
Remove the brush holder.
Flip over the power head and open the lever.
Lever
Detach the rotary brush and remove dust and debris.
Remove dust and debris
Rotary brush
Wash with water.
Do not use cleansers, bleach, etc. Doing so might cause discoloration, deformation, etc.
Note
After washing with water, thoroughly air dry it in the shade before attaching it.
Drying it requires approx. 24 hours. (The drying time varies depending on the environment
and season.)
Adjust the rotary brush with the groove and attach it to its original position.
Attach the brush holder.
Insert the hook.
Hook
Note
When attaching the brush holder, fasten the hook first. Failure to do so might cause damage.
EN-36
Remove the brush holder.
Brush holder
Remove dust and debris tangled in
the groove using tweezers, etc.
Tweezers
To wash the rotary brush with water
Shake to remove excessive water.
Attach the brush holder.
Remove dust and debris
tangled in the rotary
brush by using scissors.
Scissors
Groove
Thoroughly air dry.
Lean them against an
object to dry in the
shade.
Groove
Close the lever.
Werbung
