Hitachi PV-XH3M Bedienungsanleitung Seite 36

Maintenance
To clean with high suction power, we recommend performing frequent maintenance.
Vacuum cleaner, attachments, attachment accessories
Perform maintenance when you are concerned about dirt.
Moisten a soft cloth and then wring it out thoroughly.
Risk of eruption, fire, electric shock, or injury.
When cleaning the charging station, unplug the
plug of AC adapter from outlet.
WARNING
When cleaning the vacuum cleaner, disconnect the
connector of AC adapter from vacuum cleaner.
Do not use flammable objects, combustibles
(thinner, benzene), etc.
Risk of injury
CAUTION
Before performing maintenance on the vacuum
cleaner, make sure the vacuum cleaner is turned off.
Terminals on the vacuum cleaner and on the AC adapter
Stop operating the vacuum cleaner
battery from the vacuum cleaner
dry soft cloth.
Disconnect the plug of the AC adapter from the outlet.
Before performing maintenance on the vacuum cleaner,
disconnect the connector of the AC adapter from the
vacuum cleaner.
Washable Parts
You can wash the following parts: 2-way crevice nozzle
→
nozzle with brush (P.EN-25), clean filter
→
dust case (P.EN-33 to EN-34), and rotary brushes
Do not wash any other attachments or parts with water.
After washing any attachment or part with water, allow it to dry thoroughly before using it.
About 24 hours is required for the clean filter and sponge filter to dry.
(The drying time varies depending on the environment and season.)
During maintenance, fine dust and debris might disperse into the air. Perform maintenance in a
Note
wellventilated environment (for example, outdoors) or wear a mask to avoid breathing in the dust and debris.
EN-32
→
(P.EN-15), remove the
→
(P.EN-43), and wipe with a
→
(P.EN-24), handy brush
→
(P.EN-33), sponge filter
→
(P.EN-36).
Note
Do not use alcohol, cleansers, chemical
dust cloths, etc.
They mi ht cause cracks or
discoloration.
Terminals
Terminals
Connector
AC adapter
→
(P.EN-22), multi angle
→
(P.EN-33), inner cylinder filter and
Plug
Outlet