krick ANTARES Baubeschreibung Seite 84

Place a hook at the tack of the foresail and
hang the foresail in an eyebolt next to the fore-
stay. The hook can be made by bending the
brass wire 196.
Bend the wire into a ring on the clew and hang
on the eyelet to later attach the sheet rope to it.
Next, attach the jib.
To do so, mount one block part 162 to the eye
screw of the jib stay.
Page 36 ©
Updated June 2016 Krick Modelltechnik Knittlingen