krick ANTARES Baubeschreibung Seite 63

Attach the other parts in this way step by step
until you are finished with the superstructure.
Now the basic structure is finished.
Sand all edges of the skylight clean.
Next, attach the front companionway, which is
comprised of parts 69 to 74.
First, make the companionway frame.
Then apply the deck areas one by one.
Updated June 2016
Finally, attach the coaming, which is comprised
of parts
47 to 50.
First, put together the frame.
Then stick on the lasered roof. To make it eas-
ier to bend, place the roof in water for a while.
The last superstructure is the roof.
Page 15 ©
Krick Modelltechnik Knittlingen