krick ANTARES Baubeschreibung Seite 80

Now fit the peak halyard. To do so, attach 2
crow's feet on the gaff sail boom and place
them so that the attached stoppers limit the
path.
Attach the peak halyard on the top crow's foot.
162
162
Fasten 2 blocks of part 162 to the mast with
eye screws 167.
Run the peak halyard over the top block to the
lower crow's foot. Then tie in a block part 162
on the lower crow's foot.
Updated June 2016
Crow's foot
Peak
Page 32
Lead the peak halyard over this block back to
the lower block on the mast and from there
down and onto the pin rail.
10. Attaching the sail
Now the rig is standing and the sails can be
attached.
If you plan to sew the sail yourself, now is the
time to transfer the sail from the sail plan onto
the sailcloth and sew the sail.
However, you can also use the sail kit, order
number 61915.
Top
Mainsail
Markings on the sail
©
Krick Modelltechnik Knittlingen
162
Peak halyard
Jib
Foresail