Product Description And Specifications - Bosch GSH Professional 16-28 Originalbetriebsanleitung

OBJ_BUCH-229-004.book Page 15 Thursday, December 16, 2010 10:48 AM
Product Description and Speci-
fications
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for heavy chiselling and
demolition work as well as for driving in and
compacting with the appropriate accessories.
Technical Data
Demolition Hammer
Article number
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05/2009
Tool holder
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Noise/Vibration Information
Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
sound power level 104 dB(A). Uncertainty
K =2 dB.
Wear hearing protection!
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Handle (insulated gripping surface)
2 On/Off switch
3 Carrying handle
4 Knurled nut for carrying handle
5 Limit bolt (GSH 16-30)
6 Tool retainer (GSH 16-28)
7 Tool shank
8 Tool holder
9 Shoulder
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
GSH 16-28
Professional
3 611 C35 0..
W 1750
-1
min 1300
J 41
mm 28
kg 17.9
/II
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
1 609 929 Y34 | (16.12.10)
English | 15
GSH 16-30
Professional
3 611 C35 1..
1750
1300
41
30
16.5
/II
2
=10 m/s ,
h