Silvercrest SRGF 1400 A1 Bedienungs- Und Sicherheitshinweise Seite 24

The product is not designed for
heating flammable or alcoholic
liquids. This is a fire hazard!
Do not use coal or other similar
fuels to operate the product.
Danger of damage to
property
Do not use the product in direct
sunlight or near heat-producing
devices.
Discontinue using the product if
parts are cracked or deformed.
Always replace damaged parts
with genuine spare parts.
Do not use knives, forks or similar
items to take food out of the small
pans or off of the griddle. This
could damage the non-stick
coating on the griddle / small
pans.
Only use the product with the
supplied original accessories.
FOOD SAFE! This prod-
uct has no adverse effect
on taste or smell.
Before first use
Remove the product and the accessories from
the packaging. Remove all stickers, protective
films and transport locks from the product.
24 GB/IE
Before initial use, clean the griddle
due pot and the other accessories (see
6
chapter "Cleaning and care"). Leave everything
to dry completely before operating the product.
Set up the product (see chapter "Setting up the
product").
Insert the mains plug of the mains cable into
the socket.
Note: Before connecting the product, ensure
that the mains voltage specified on the product
matches the local line voltage (voltage:
220 - 240 V ~ , 50/60 Hz).
Set the temperature control
position (see Fig. A). The indication light
lights up red and shows that the product is
heating up.
Note: When heating the product for the first
time, a slight smell may develop. This is normal.
Make sure you have adequate room ventilation.
The smell will only remain for a short time and
will disappear quickly.
Set the temperature control
tion after 20 minutes and leave the product to
cool down completely.
Wipe the griddle
1
everything to dry completely before operating
the product again.
Initial use
Note: Before using the product, always make sure
that the mains cable, the mains plug and all the
component parts of the product are undamaged.
Setting up the product
Set the griddle with the corrugated surface
1
facing upwards on the base
Place the product on a flat and
stable surface and ensure that
there is a minimum of 10 cm of
clear space around the product.
, the fon-
1
to the "MAX"
3
3a
to the "0" posi-
3
with a damp cloth. Leave
.
4