Silvercrest SRGF 1400 A1 Bedienungs- Und Sicherheitshinweise Seite 23

Always disconnect the product
from the power supply after use.
The product will continue to draw
a minimal amount of power when
it is switched off but still con-
nected to the electricity supply.
In order to switch the product off
completely, unplug the mains
plug from the mains socket.
Never open any of the electrical
equipment or insert any objects
into this equipment. Such inter-
ferences pose a risk of fatal in-
jury from electric shock.
If this product's mains cable is
damaged, it must be replaced
by the manufacturer, its customer
services or a similarly qualified
specialist to ensure dangerous
situations do not arise.
Never use the mains cable as a
carrying handle.
Before use, ensure that the avail-
able mains voltage matches the
operating voltage required by
the product (220–240 V∼,
50‒60 Hz).
The user does not need to take
any steps to set the product to
50 Hz or 60 Hz. The product au-
tomatically sets itself to 50 Hz or
60 Hz.
Prevent fire and injury
hazards
Do not cover the product with
any objects while it is in use. Ex-
cessive heat can result in fire.
Never leave the product unat-
tended whilst in operation. Ex-
cessive heat can result in fire.
Only connect the product to an
easily accessible socket with a
ground conductor, so that it can
quickly be disconnected from
the mains in the event of a fault.
The product must be positioned
on a flat, stable surface.
Do not use the product with an
external timer switch or a separate
remote control system.
The product and the accessories
you use become hot during op-
eration. Only touch the tempera-
ture control and the handles while
the product is still in operation.
The fondue pot and its contents
are hot during operation. Only
touch the fondue pot or the prod-
uct once they have sufficiently
cooled down. There is a risk of
burns!
Allow the product to cool down
after use before cleaning it. There
is a risk of burns due to hot sur-
faces!
GB/IE 23