Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fatal error
The controller passes into this status if a non-tolerable error is
found. This status can only be left via a reset.
The LED is lit red.
No
operating
system
Status when delivered, the controller is in the bootloading
status. Before loading the application software a download of
the operating system must be carried out.
The LED flashes green (fast).
6. Maintenance, repair and disposal
As the controller ecomat R 360 does not contain any components which must
be maintained by the user, the housing must not be opened.
The maintenance of the controller may only be carried out by the manufactur-
er.
The disposal must be carried out according to the corresponding national envi-
ronmental regulations.
7. Declaration of conformity
The CE-marking is applied on the basis of the EMC guideline EMC
89/336/EWG, implemented in the standards EN 500 81-1 and EN 500 82-2 as
well as the low voltage guideline NS73/23/EWG, implemented in the standard
EN61010.
CR0015
page 21
Werbung
