Herunterladen Diese Seite drucken

Husqvarna DM1 PACE Bedienungsanweisung Seite 12

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

To connect to the product with
Husqvarna Fleet Services
Note:
Radio transmission by
enabled on the first time of connection to a battery, and
stay on after that.
1. Download the iOS or Android app Husqvarna Fleet
Services.
2. Go to https://fleetservices.husqvarna.com for more
information.
To connect the battery charger
WARNING:
charge in ambient temperatures between
5°C/41°F and 40°C/104°F.
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
To connect the battery to the battery
charger
Note:
Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
Note:
The battery will not charge if the battery
temperature is too high. Let the battery become cool
before the battery charges
1. Make sure that the battery is dry.
2. Put the battery in the battery charger.
3. Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
12
®
Bluetooth
will be
Only use the battery
4. When all LEDs on the battery come on, the battery is
fully charged.
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note:
Refer to the battery and battery charger
manuals for more information.
To prepare the product for inverted
drilling
WARNING:
with a sealing disc and a rubber washer
during inverted drilling. Water that enters
the product increases the risk of electrical
shock.
Note:
The slurry ring, sealing disc and rubber washer
are accessories. Speak to your local service agent for
more information.
1. Clean the top of the slurry ring. All grease and dirt
must be removed.
2. Attach 2-sided adhesive tape or use spray glue
around the top opening of the slurry ring (A). Put
the sealing disc on the top opening as a cover (B).
Attach it tightly.
Always use a slurry ring
A
B
1941 - 005 - 25.09.2023

Werbung

loading