Endress+Hauser Promag 10 Einbauanleitung Seite 16

EA00082D
9.3.1 Assembling Ex version of aluminum transmitter
Reassembly is carried out in reverse order. Note the following:
When installing, use new housing seals!
1 →
4
1.
PH 2
0.5 × 3.5 mm
For detailed information on the electrical connection, see the "Electrical connection"
section of the Operating Instructions for the device.
For detailed information on commissioning, see the "Commissioning" section of the
Operating Instructions for the device.
16
2 →
‣
Acid-free, non-hardening
lubricant
2.
3 →
‣
Acid-free, non-hardening
lubricant
Endress+Hauser