Unpacking - Scheppach HL760LS Originalbetriebsanleitung

Characteristic noise emission values
sound power level L
sound pressure level L
uncertainly K
WA/pA
*S3, periodic intermittent operation without influence of the starting pro-
cess on the motor heating. Identical duty cycles with a period at load
followed by a period at no load. Running time 10 minutes; duty cycle is
25% of the running time.
Pressure:
The performance level of the built-in hydraulic pump can reach a short-
term pressure level for a splitting force of up to 7 tons. In the basic
setting, hydraulic splitters are set at the factory to an approx. 10% lower
output level. For safety reasons, the basic settings must not be changed
by the user. Please note that external circumstances such as operating
and ambient temperature, air pressure and moisture affect the viscosity
of the hydraulic oil. In addition, manufacturing tolerances and mainte-
nance errors can affect the reachable pressure level.

8. Unpacking

• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and trans-
port bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• In case of complaints the dealer must be informed immediately. Sub-
sequent complaints will not be accepted.
• If possible, store the packaging until the warranty period has expired.
• Read the operating manual to make yourself familiar with the device
prior to using it.
96 dB (A)
WA
89,9 dB (A)
pA
3 dB
www.scheppach.com
GB | 43