Input For Global Standby - Danfoss CF-MC Anleitung

Instruction CF-MC Master Controller

5.3 Input for Global Standby

• Connect the two wires from an external switch (ON/OFF) to the two
terminals for the Global Standby input. (fig. 1)
When this switch is closed (ON) the system will override the current
set point for all the room thermostats and change it to 8°C
• Fix the cable. (fig. 14)
Note: The Global Standby ensures a set room temperature fixed at 8°C for
all Room Thermostats, but it can be changed with the Remote Controller,
CF-RC.
VI.UH.K1.52
Produced by Danfoss Floor Heating Hydronics 08.005
9