Reset Of Master Controller - Danfoss CF-MC Anleitung

Instruction CF-MC Master Controller

6.5 Reset of Master Controller

Resetting the Master Controller to factory settings (fig. 23)
• Disconnect the 0V power supply to the Master Controller until the
power LED
• Press and hold at the same time the menu selection button
button
power supply to the Master Controller and release the three buttons
when the power LED
• All the output LEDs
all output LEDs go OFF.
0
VI.UH.K1.52
is OFF
, and the output selection button
is ON
will be ON. The Master Controller is reset when
Produced by Danfoss Floor Heating Hydronics 08.005
. Reconnect the 0V
, the OK