Storage For Prolonged Periods Without Operation; Disposal; Description Of Symbols; Speed Adjustment - Viking MB 756 GS Gebrauchsanleitung

Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.
4.8 Storage for prolonged periods
without operation
Allow the engine to cool before storing the
machine in an enclosed space.
Store the machine with empty fuel tank
and open tank ventilation screw as well as
the fuel reserve in a lockable and well-
ventilated room.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Never store the machine with petrol in the
tank inside a building. The resulting petrol
fumes could come into contact with naked
flames or sparks and could be ignited.
If the tank has to be emptied (e.g. to store
the machine before the winter break), this
should only be done out of doors (e.g. by
running the tank empty).
Thoroughly clean the machine before
storage (e.g. winter break).
Only store the machine with the spark plug
socket disconnected.
Store the machine in good operational
condition.

4.9 Disposal

Waste products such as used engine oil,
gearbox oil or fuel, used lubricants, filters,
batteries and similar wearing parts can be
harmful to people, animals and the
environment, and must consequently be
disposed of properly.
40
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. VIKING
recommends VIKING specialist dealers.
Ensure that old machines are properly
disposed of. Render the machine
unusable prior to disposal. In order to
prevent accidents, remove the ignition
lead, empty the fuel tank and drain the
engine oil in particular.
Risk of injury due to the mowing blade!
Always store an old lawn mower in a safe
place prior to scrapping. Ensure that the
machine and particularly the mowing blade
are kept out of the reach of children.

5. Description of symbols

Caution!
Read the instruction man-
ual before initial use.
Risk of injury!
Keep other persons out of
the danger area.
Risk of injury!
Detach the spark plug
socket before performing
work on the cutting tool or
maintenance and cleaning
work.
Risk of injury!
Keep your hands and feet
away from the blades.
Cutting tool runs on for sev-
eral seconds after switching
off (engine/blade brake).
Wear hearing protection
when working.
Caution – risk of injury!
Never reach into the working area of the
blade when the engine is running.

Speed adjustment:

MB 756 YS, MB 756 YC:
Maximum speed
Minimum speed
Throttle:
Choke position
Start position
0478 111 9925 C - EN