Herunterladen Diese Seite drucken

Parkside PAP 20 B1 Originalbetriebsanleitung Seite 9

Akku 20 v 2 ah + ladegerät
Vorschau ausblenden Andere Handbücher für PAP 20 B1:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
Safety guidelines for battery chargers
This appliance may be used by
children aged 8 years and above
and by persons with limited
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge, provided that
they are under supervision or
have been told how to use the
appliance safely and are aware
of the potential risks. Do not
allow children to use the appli-
ance as a toy. Cleaning and user
maintenance tasks may not be
carried out by children unless
they are supervised.
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their cus-
tomer service department or a
similarly qualified person.
The charger is suitable for indoor use only.
ATTENTION!
This charger can only charge the follow-
ing batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
A current list of battery compatibility can
be found at www.lidl.de/akku.
GB │ IE
4 
WARNING!
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
Before use
Installation on a wall
WARNING!
Before wall mounting, make sure that there is
no damage to any cables in the vicinity of the
drill holes required for the mounting.
Route the mains cable so that it does not
obstruct you and no one can pull on it
accidentally.
Do not allow children to play with the appli-
ance, even when it is mounted on the wall.
Never operate the charger on a combustible
surface.
Never place the charger on a damp surface.
Mounting the charger behind doors or within
their swinging range is not recommended, as
there is a risk of it being torn off or otherwise
damaged.
The charger has two holes on the back for wall
installation. You can hang it on a wall, taking the
safety instructions into account. To do this, use two
screws (not supplied) with the specified dimensions
and spacing (see fig. on the fold-out page).
PAP 20 B1 + PLG 20 C1

Werbung

loading

Diese Anleitung auch für:

Plg 20 c1